Painters on the market today traditionally use raw materials such as vegetable glue, powder, gypsum powder, varnish and white glue to make batches of wall plaster by themselves, and the price and cost are relatively economical. But in fact, making batches of wall plaster by yourself requires certain skills, and the stability is not enough, so you still buy ready-made batches of wall plaster for construction. Nippon Paint Odour-less Wall Putty was launched with high quality considering the difficulties encountered in chalking, such as technique, effect, smell and so on.
In fact, the vegetable glue powder on the market requires a lot of effort to prepare, and the most important thing is that the use of vegetable glue powder can easily cause mold on the wall! Because vegetable gum is a plant fiber, extracted from seaweed, it is easy to cause bacteria to grow on the wall.
Chalking can be divided into three steps:
1. Clean up the dust
2. Chalking
3. Polish
Clean up the dust is actually to fill up some uneven walls with large gaps to make them smooth, and add plaster to increase their stability. The next step is to apply the dust to make the surface of the wall smoother and smoother, and achieve a smooth effect through repeated chalking actions. However, the chalking should not be too hasty to apply all at once. It is necessary to wait for each layer of the dust to dry before applying the dust again. Otherwise, cracks will appear on the wall, and if you apply too much too quickly, the natural absorption will be uneven, so remember not to be too quick and too thick at once. The last step is to polish, which is mainly to sweep away the excess dust on the wall and make the overall wall smoother and smoother. The polish also needs to be repeated many times to make the paint more full and smooth. As for the polish tool, you can choose Nippon Bang Sanding Sponge, which uses high-density sponge, electrostatic sand planting process, parallelogram design, easy to polish the corners, good elasticity, durability, not easy to remove sand, and can be reused after cleaning.
The wall has been severely eroded by the accumulation of precipitation over time. In addition to the problem of time, there are also reasons for the climate. Because the climate in Hong Kong is often humid, and the housing environment and structural problems in Hong Kong are quite special, the sunlight cannot fully shine into the house, which makes the problem of humidity in the house gradually serious. In addition to re-cleaning the dust, the best way is to take good ventilation measures, for example: opening the windows to allow air convection, which can effectively eliminate the humid molecules mixed in the air. Or some special weather, such as the weather after rain or the rainy season that is prone to mold, you need to pay attention when these weathers occur. Residents with dehumidifiers can use dehumidifiers to strengthen the elimination of moisture in the house. Content, fully keep the room in a state of constant temperature, dryness and humidity.
Residents may encounter some serious wall problems. For example, the wall has been aged for more than 10 years, and a large area of the wall has been severely affected by moisture. Carry out a major renovation, and redo it together with the paint and dust on the wall. You don't have to worry about this cumbersome project, because Nippon Paint has launched a refresh service for homeowners who need major renovations to help them solve the problem. All the problems encountered in the renovation do not need to be done by the customer at all. Nippon Paint provides one-stop service, and also provides a variety of renovation cases for customers to refer to, so that everyone can have a general understanding of the renovation, and then a series of renovations will be introduced Process, answer customers' doubts, strive to achieve excellence, and provide residents with a perfect and comfortable living environment.